Tablet, watch, earbud and console questions

Press the top button and the Volume Up button at the same time on iPads without a Home button. On iPads with a Home button, press the Home button and the top button together. Find the image in Photos.Try: Repair cost estimator

On iPads without a Home button, press and release Volume Up, press and release Volume Down, then hold the top button until the Apple logo appears. On iPads with a Home button, hold the Home and top buttons together.

Usually it is a dirty charging port, a damaged cable or a weak power adapter. Clean the port gently with a wooden toothpick, try another cable and charger, and plug into a wall outlet instead of a computer.

Usually $150 to $400 at a repair shop, depending on the model and whether the glass and display are fused together. Newer Pro models cost more. Ask for a quote before you agree.Try: Repair cost estimator

It is often a failed update or a software glitch. Force restart it first. If that fails, connect it to a computer and use the update option in Finder or iTunes, which keeps your data when it works.

Go to Settings, General, Transfer or Reset iPad, then Erase All Content and Settings. Back up first, because this deletes everything. You will need your Apple ID password to finish.

Open an app, then tap the three dots at the top of the screen and choose Split View. Pick a second app from the Home Screen or dock. Not every iPad model supports this.Try: Repair cost estimator

Add Screen Recording in Settings, Control Center, then swipe down from the top right corner and tap the record button. A three second countdown starts. Tap the red status indicator or the same button to stop.Try: Repair cost estimator

Common causes are low storage, old software, too many open apps or an aging battery. Restart it, update iPadOS, delete unused apps and clear Safari data. Very old models may simply be too old for current apps.

Go to Settings, General, Software Update and tap Download and Install. Keep it plugged in and on Wi-Fi. If no update appears, your model may not support the latest version.

Often yes, if the touch still works and there are no sharp glass edges. Cracks can spread and damage the display, so repair it soon. A screen protector or clear tape helps for a short time.Try: Repair cost estimator

The battery may be fully drained. Charge it for at least 30 minutes with a known good cable, then hold the top button. If nothing happens, try a force restart. If that fails, it may need a repair.

Go to Settings, General, About and look for Model Number. You can also read the small print on the back of the iPad. The model number starts with the letter A.

Use AirPlay if your TV supports it, or a USB-C or Lightning digital AV adapter with an HDMI cable. For AirPlay, open Control Center, tap Screen Mirroring and pick your TV.

Pair a compatible Apple Pencil by attaching it magnetically or plugging it in, depending on the model. Not every Apple Pencil works with every iPad, so check compatibility on Apple's support page.

Clean the screen, remove the case and screen protector, then force restart the iPad. Update iPadOS if you can. If touches are still ignored or random, the screen or digitizer may need repair.Try: Repair cost estimator

Place the devices close together and follow the Quick Start prompts on the new iPad. You can also restore from an iCloud or computer backup during setup. Keep both on Wi-Fi and charging.

Press the Power and Volume Down buttons at the same time. You can also swipe the edge of your palm across the screen if palm swipe is turned on in Settings, Advanced features.Try: Repair cost estimator

Go to Settings, General management, Reset, Factory data reset. Back up your data first because everything will be erased. Sign out of your Google and Samsung accounts before resetting.

Hold the Power button for 10 to 30 seconds until it restarts. On many Samsung tablets, hold Power and Volume Down together for about 10 seconds. If it stays frozen, charge it fully and try again.

Low storage, too many background apps and old software are the usual causes. Restart it, uninstall unused apps, clear app cache and install updates. If it is several years old, it may be reaching its limit.

Hold the Power button, then touch and hold Power off until the Safe mode prompt appears and tap it. On some tablets you hold Volume Down while it restarts. Restart normally to leave safe mode.

Try a different cable and charger first, since cables wear out. Clean lint from the charging port carefully. If it still will not charge, the port or battery may be failing and need repair.

Usually $60 to $150 at a repair shop for common tablets, and more for premium models where the battery is glued in. Swelling batteries should be replaced promptly.Try: Repair cost estimator

Pair a Bluetooth keyboard in the tablet's Bluetooth settings, or attach a keyboard made for your model using its connector. Put the keyboard in pairing mode, then choose it from the list.Try: Repair cost estimator

Yes. iPads can work with a Mac using Sidecar, and many Android tablets and iPads can work with Windows through compatible apps. A wired connection is usually the most reliable.

iPads run iPadOS and get long software support with a tightly controlled app store. Android tablets run Android, come from many makers, and often cost less. Pick based on the apps and accessories you need.

Most tablets last about 4 to 7 years before the battery wears down or updates stop. iPads often get software updates longer than budget Android tablets. Careful charging helps the battery last longer.

Apple does not show battery health on iPads in Settings. A repair shop or an Apple service visit can run a diagnostic. Signs of a worn battery include fast drain and shutting off at low percentages.Try: Repair cost estimator · Read: iPad mini (A17 Pro) Battery Dying Fast? How to Check Battery…

Some warmth is normal, especially while using the tablet. Heavy apps, a thick case, a non-matching charger or direct sun can make it hotter. If it is too hot to hold, unplug it and let it cool.

Press and hold the side button until the sliders appear, then drag the Power Off slider. In some versions, tap the power icon first. Hold the side button again to turn it back on.

Hold the side button and the Digital Crown together for about 10 seconds, until you see the Apple logo. Only do this when the watch is frozen, since a normal restart is gentler.

Go to Settings, General, Reset, Erase All Content and Settings on the watch. You can also unpair it from the Watch app on your iPhone, which backs it up first. This removes Activation Lock when done on the paired phone.

Open the Watch app on the iPhone, tap Pair New Watch and scan the animation on the watch face. Follow the prompts to restore a backup or set up as new. Both need to be updated.

Check that the charger is plugged into a working adapter and the back of the watch is clean and dry. Align the watch on the charger and remove any case. Try another cable or restart the watch.

Usually $100 to $300 at a repair shop, depending on the model. Apple Watch Ultra and stainless steel models cost more. A replacement battery is often cheaper than a new watch.Try: Repair cost estimator

Turn on screenshots in the Watch app on your iPhone under General. Then press the Digital Crown and the side button at the same time. The image saves to the Photos app on your iPhone.Try: Repair cost estimator

Apple Watch is water resistant, not waterproof, and is rated for swimming on recent models. Avoid hot water, saunas and high speed water sports. Water resistance can fade over time, especially after a repair.

On your iPhone, open the Watch app, tap General, then Software Update. Keep the watch on its charger and within range of the iPhone. You can also update from the watch settings on newer models.

Always-on display, cellular use, workouts, many notifications and an aging battery all use power. Update watchOS, turn off unneeded features and restart it. After a few years, a battery replacement may help.Try: Repair cost estimator · Read: Apple Watch Ultra 2 Battery Draining Fast? 8 Fixes to Try Before…

Press the small band release button on the back of the watch near the band, then slide the band sideways out of the slot. Slide the new band in until it clicks.

Only partly. An iPhone is needed for setup. Cellular models can then make calls and use apps away from the phone. Without an iPhone nearby on Wi-Fi, some features will not work.

Open the Find My app on your iPhone, choose the Devices tab and tap your watch. You can play a sound or see its last known location. Turn on Lost Mode if it is missing.

The watch may be too loose, dirty or on a wrist with tattoos or dry skin. Wear it snug above the wrist bone, clean the sensor and check that heart rate is turned on in Settings, Privacy and Security.

On your iPhone, open the Watch app, tap All Watches, tap the info button next to your watch and choose Unpair Apple Watch. Keep them close together so a backup can be made first.

On the watch, go to Settings, General, Reset. Or in the Galaxy Wearable app on your phone, choose General, Reset. This erases data on the watch, so your phone backup matters.

Press and hold the Home button for about 7 seconds, or use the power menu and tap Restart. If it is frozen, holding the Home and Back buttons together for about 7 seconds often forces a restart.

Turn Bluetooth off and on, restart both devices and make sure the watch app is updated. If it still fails, remove the watch from the phone's Bluetooth list and pair it again.

It is best to use the charger made for your watch, because chargers are often specific to the model. A compatible replacement from a reputable brand may work. Do not force a different connector.

Depends on the watch. Many smartwatches need charging every day or two, while some fitness trackers last a week or more. Batteries wear down after a few years of daily charging.

It can be, if you want notifications, fitness tracking and quick payments on your wrist. If you only want the time, a basic watch is cheaper. Check that it works with your phone first.Try: Repair or replace calculator

Only if it has a water resistance rating that covers swimming. Check the manual. Rinse it after salt water or chlorine, and avoid hot tubs and showers because heat and soap can damage seals.

Steps vary by model. Many Fitbit devices have a restart option in Settings, and a factory reset or Clear User Data option in the Settings menu. Check the help page for your exact model before erasing.

Step counts are estimates from motion sensors. Wear the watch snugly on your non-dominant wrist and set your height and stride correctly. Pushing a stroller or riding in a car can throw counts off.

Silicone and fluoroelastomer bands can be wiped with mild soap and water, then dried. Leather bands should only be wiped with a barely damp cloth. Avoid harsh cleaners and alcohol on leather and fabric.

Put the AirPods in the case and close the lid for 30 seconds. Open the lid, hold the setup button on the back until the light flashes amber then white, and reconnect. Remove them from your phone's Bluetooth first.

Put the AirPods in the case, open the lid and hold the setup button until the light flashes white. Then pick them from the Bluetooth list on the device. Some Apple-only features will not work.

The other may be out of charge, dirty or not connected. Charge both in the case, clean the mesh gently with a dry soft brush, then reset them. If one stays silent, it may need service.

Wipe them with a soft, dry, lint-free cloth. Use a dry cotton swab or soft brush for the speaker mesh. Avoid liquid, sharp objects and compressed air, which can push dirt in further.

Earwax or debris blocking the speaker mesh is the most common cause. Clean them gently with a dry soft brush. Also check the audio balance setting, the fit of the ear tips and the Bluetooth connection.

Open the Find My app on your iPhone, choose Devices and tap your AirPods to see their last location or play a sound. Playing a sound only works while they are connected and out of the case.

Apple and other repair providers charge roughly $50 to $100 for a single replacement AirPod, depending on the model. A lost charging case also costs extra. Check with your provider for exact pricing.Try: Repair cost estimator

Usually it is not practical, because the batteries are tiny and sealed in. Apple offers a battery service for some models in some places, but many people simply replace the AirPods when the battery fades.Try: Repair cost estimator

Look at the light on the case. Amber means charging and green means fully charged for a case with lights. Open the lid near your iPhone to see the battery level on screen.

The battery usually holds up well for 2 to 4 years of daily use, then listening time drops. Many people replace them when each charge gets too short for their needs.

With AirPods Pro or AirPods Max, press and hold the stem or the noise control button, or use Control Center on your iPhone and choose Noise Cancellation. Not all AirPods models have it.

AirPods update automatically when they are in the charging case, near your iPhone, connected to power and in range. You can check the version in Settings, Bluetooth, tap the info button next to the AirPods.

Turn Bluetooth off and on, put the AirPods in the case, wait 15 seconds and try again. If that fails, forget them in Bluetooth settings and reset them by holding the setup button on the case.

Charge them, turn Bluetooth off and on, then put the earbuds in pairing mode and remove old entries from your phone. If they still do not appear, reset them using the steps for your brand.

Dirt on the charging contacts is a common cause. Wipe them with a dry cotton swab. Check that the case has power and that the earbuds are seated fully. A worn battery may be the issue.

Move away from interference, keep your phone close and restart both. Clean the earbuds and update their firmware if the app offers it. Static that never goes away can mean a failing earbud.

Only if rated for it. Check the IP rating in the manual. Sweat resistant is not the same as swim proof. Dry them well after getting wet and do not charge them while damp.

Check the left and right balance in your phone's audio settings. Clean both earbuds and try the ear tips in a different size. If one is still quieter, a fault in the earbud is likely.

Often you pay for better sound, noise cancellation, battery life and call quality. If you mainly listen to podcasts or music casually, mid-priced earbuds may be enough. Try them if you can.Try: Repair or replace calculator

Find the small reset hole on the back near the shoulder buttons. Use a thin pin to press the button inside for about 5 seconds, then reconnect the controller with a USB cable.

Plug it into the console with a USB cable, then press the PS button. To pair wirelessly, hold the PS and Create buttons until the light bar flashes, once it is registered with the console.

Stick drift is usually caused by dust, wear or a faulty sensor inside the analog stick. Try cleaning around the stick and recalibrating. If it continues, the stick module often needs replacing.

Update your Switch, go to Controllers and Sensors and calibrate the control sticks. Clean around the stick with a little isopropyl alcohol on a swab. If drift remains, the Joy-Con may need repair or replacement.

Usually $20 to $50 at a repair shop for a stick replacement. Nintendo has offered free repairs in some regions, so check their support page. A DIY stick kit costs less but takes patience.Try: Repair cost estimator

Dust, dirt or worn stick parts are common causes. Clean around the stick with isopropyl alcohol, then check the dead zone in the Accessories app. If it persists, replace the thumbstick or the controller.

Plug it in with a USB cable, or pair it by holding the pairing button on top until the Xbox logo flashes, then add a Bluetooth device in Windows Settings. Some models also support the Xbox wireless adapter.

Hold the Xbox button to turn the controller on, press and hold the pairing button until it flashes fast, then choose it in your phone's Bluetooth settings. Works on many iPhone and Android phones.

Replace the batteries or charge the pack and check the contacts are clean. Hold the Xbox button for a few seconds. If it still stays off, try a USB cable. A lasting failure may be a hardware fault.

Low battery, interference or distance from the console is typical. Replace or charge the batteries, move closer and update the controller. Remove other wireless devices nearby and re-pair it.

Turn it off, then wipe it with a cloth slightly dampened with isopropyl alcohol. Use a cotton swab around buttons and sticks. Do not soak it or let liquid enter the openings.

Hold the Power button for about 12 seconds to force a shutdown, then press it again to turn it on. A full factory reset is in System Settings, System, Formatting Options, and deletes all data.

The battery may be fully drained. Charge it with the official dock or adapter for at least 30 minutes, then press Power. If that fails, try a different adapter and cable. A repair may be needed.

Check the adapter and cable, and clean the USB-C port with a wooden toothpick. Third party docks can cause problems, so test with the official charger. A damaged port may need repair.

Check that the dock is plugged in, the HDMI cable is secure, and the TV input is correct. Unplug the dock and AC adapter for 30 seconds. Try another HDMI cable or port.

Restart the console and router, then test the connection in System Settings, Internet. Move closer to the router. If it still fails, check for service outages or try a wired adapter.

Go to System Settings, System, System Update. The console downloads and installs the update if one is available. It will also update automatically while in sleep mode when connected to the internet.

Use System Transfer in System Settings, User, Transfer Your User and Save Data. Both consoles need to be updated and online. Cloud saves cover some games if you have the online service.

It depends on the problem. Disc drive, HDMI port or controller repairs often run $50 to $200 at a repair shop, and motherboard repairs cost more. Compare with the price of replacing the console.Try: Repair cost estimator

Check the power cable and outlet, then unplug it for a few minutes. Hold the Power button for 7 seconds to start in safe mode. A blinking blue or white light can mean a hardware problem.

Turn the console fully off, then hold the Power button until you hear the second beep, after about 7 seconds. Connect a controller with a USB cable and pick an option such as Restart or Clear Cache.

Poor airflow is usually the cause. Keep the console in an open area with space around the vents, away from heat, and clean dust from the vents. Updating system software may help control the fan.

Restart it, install updates and free up storage. Clear the console's cache by holding the power button for 10 seconds, then unplugging it briefly. Frequent freezing may mean a failing hard drive.

Hold the Xbox button on the controller, choose Restart console, then pick Restart. To force it off, hold the console's power button for about 10 seconds until it turns off.

Dust, a scratched disc or a faulty drive can cause it. Try another disc, clean the disc gently from center outward and restart the console. If many discs fail, the drive may need repair.

Try a different HDMI cable and TV port first. Bent pins or a loose port can cause no signal. Repairing the port usually takes soldering, so a repair shop is the safer option.

Go to Settings, tap Device Options, then Reset Device or Reset. This erases your downloads and settings, but your purchases stay in your account. Menus vary slightly by model.

Charge it for at least 30 minutes with a known working cable and adapter. Hold the power button for about 40 seconds to force a restart. If the screen stays blank, it may need service.

Hold the power button for 7 to 40 seconds to force a restart, depending on the model. Make sure the software is updated. If it freezes often, a factory reset may help.Try: Repair cost estimator

Try another cable and wall adapter, and clean the charging port gently. Charging from a computer can be slow. If the light stays off, the battery or port may be failing.Try: Repair cost estimator

E-ink screens can show faint ghost images, which a page refresh clears. Lines or dark patches that stay are usually damage to the screen from pressure or drops and need replacement.Try: Repair cost estimator

Buy or borrow books through the Kindle store on the device or in the app, or send files by email to your Send to Kindle address. You can also copy supported files over USB.

Go to Settings, tap Wi-Fi, choose your network and enter the password. If it will not connect, restart the Kindle and the router, and check that your network uses a supported band.

Use your library's lending app or website, choose the Kindle option and sign in to your account. The book is delivered to your device over Wi-Fi. Availability depends on your library.

For long reading sessions, an e-reader is easier on the eyes in bright light and the battery lasts weeks. A tablet is better for color content, comics and other apps.

Often several weeks with moderate reading and Wi-Fi turned off. Brightness, page turns and wireless use shorten it. The battery slowly wears down over several years.Try: Repair cost estimator

On iPads without a Home button, hold the top button and either volume button until the slider appears, then drag it. On iPads with a Home button, hold only the top button. You can also use Settings, General, Shut Down.

Go to Settings, Display and Brightness and choose Dark. You can also open Control Center and press and hold the brightness slider to find the Dark Mode button. Auto mode switches at sunset.

For Safari, go to Settings, Apps, Safari, then Clear History and Website Data. Other apps usually have no cache button, so offloading or reinstalling an app clears its stored data. Menu names vary by iPadOS version.

Photos, videos, apps and their data fill space fast. Check Settings, General, iPad Storage to see what uses the most, then offload unused apps, delete large videos or move photos to iCloud.

Go to Settings, tap your name, scroll down and tap Sign Out. Enter your Apple ID password when asked. Sign out before selling or giving the iPad away, and turn off Find My first.

Try a different cable and a wall adapter, since computer ports can be too weak. Clean the port gently and restart the iPad. If the message stays, the port or battery may need repair.

Software glitches, a bad update or a damaged display are the usual causes. Force restart, update iPadOS and turn off Auto-Brightness to test. If it flickers after a drop, the screen likely needs repair.Try: Repair cost estimator

A disabled iPad means too many wrong passcodes. You usually need to erase it using a computer in recovery mode, or from the lock screen Erase option on newer versions. You will need your Apple ID to set it up again.

For browsing, email, notes and streaming, yes. With a keyboard case it works well for many people. Tasks that need full desktop software, heavy file management or certain programs are easier on a laptop.

Open the AirPods case near your iPad and follow the setup prompt, or pick them in Settings, Bluetooth after holding the setup button on the case. If they were set up on your iPhone, they may appear automatically.

Open the item, tap the Share button, then tap Print and choose an AirPrint printer on the same Wi-Fi network. Many modern printers support AirPrint. Otherwise use the printer maker's app.

Go to Settings, General, Background App Refresh and turn it off for all apps or just the ones you pick. Swiping apps closed does not usually save battery, because iPadOS manages them automatically.

Go to Settings, Display and Brightness, then Auto-Lock and choose a time. A shorter time saves battery. Some iPad models also offer a Never option for presentations or reading.Try: Repair cost estimator

Press the Power and Volume Down buttons at the same time on most Fire tablets. On a few older models, the combination may differ. Find the image in the Photos app or Files.Try: Repair cost estimator

Go to Settings, Software update, then Download and install. Keep the tablet plugged in or above 50 percent battery and on Wi-Fi. If no update shows, your tablet may have reached its end of support.

Press and hold the Power button and tap Power off, or swipe down from the top and tap the power icon. On some models, holding the Power button opens Bixby, so use the quick panel instead.

Low storage, old app versions and low memory are common causes. Update the apps and system, clear the app cache and free up space. If one app still crashes, uninstall and reinstall it.

Go to Settings, Apps, pick the app, tap Storage and then Clear cache. Do this per app. Avoid Clear data unless you want to reset that app, since it deletes its saved settings.

On Android, use Smart View, Cast or Screen Cast in the quick settings while your TV is on the same Wi-Fi. On iPad, use Screen Mirroring in Control Center. A wired HDMI adapter also works on many models.Try: Repair cost estimator

Only in cellular models. Wi-Fi only tablets have no SIM slot. If yours has one, insert a nano SIM or set up an eSIM from your carrier. You may need a separate data plan for the tablet.

On iPad, use Screen Time in Settings. On Android tablets, use Google Family Link or the built-in kids mode on Samsung. You can limit apps, set daily time limits and filter web content.

Modern tablets stop charging at 100 percent, so it is generally safe, but constant heat can wear the battery faster. Using battery limit settings, available on many models, helps keep it healthy.

Around 8 inches is easy to carry and good for reading. Between 10 and 11 inches suits video, drawing and general use. Larger tablets near 13 inches work better with keyboards and for productivity.Try: Repair cost estimator

Stop using and charging the tablet right away. A swollen battery can leak or catch fire. Do not press on it or puncture it. Take it to a repair shop or recycling center for safe replacement.Try: Repair cost estimator

Check that auto-rotate is on in quick settings or Control Center, or locked if you do not want rotation. Restart the tablet. If it still misbehaves, update the system or recalibrate the sensor in settings.Try: Repair cost estimator

Press and hold the Home and Back buttons together for about 7 seconds until the watch restarts. This works when the watch is frozen. Menu steps can vary by model and Wear OS version.

On the watch, go to Settings, Battery, Battery Health. It shows maximum capacity as a percentage. Apple generally says a battery below about 80 percent capacity is a reason to consider service.Try: Repair cost estimator · Read: Apple Watch Series 8 Battery Replacement: $99 at Apple, Free With…

When a call comes in, tap the green phone button on the watch. Speak into the watch or tap the phone icon to move the call to your iPhone. Your iPhone needs to be nearby, or the watch must have cellular.

On the watch, go to Settings, Display and Brightness, then Always On and turn it off. This can help battery life. Only some Apple Watch models have an always-on display.Try: Repair cost estimator

Check that Focus or Do Not Disturb is off, the watch is on your wrist and unlocked, and Bluetooth is connected. In the Watch app on your iPhone, open Notifications and confirm each app is allowed.

It may be in power reserve, out of charge, or frozen. Put it on the charger and hold the side button. If it stays black, force restart it by holding the side button and Digital Crown for about 10 seconds.Try: Repair cost estimator

Press and hold the current watch face, swipe to the end and tap the plus button, or use the Face Gallery in the Watch app on your iPhone. Pick a face, adjust complications and tap Add.

Add a card in the Watch app on your iPhone under Wallet and Apple Pay. To pay, double-click the side button and hold the watch near the card reader. Banks must support Apple Pay.

No. Apple Watch needs an iPhone for setup and many features. If you use Android, a Galaxy Watch, Pixel Watch or another Wear OS watch is a better fit.

Generally not well. Newer Galaxy Watch models are built for Android phones and need Samsung software for setup. Check the maker's compatibility page before buying, since support differs by model.

Open the companion app on your phone, enable notification access and pick which apps may send alerts. Keep Bluetooth on and the watch connected. Some phones have battery saver settings that block alerts.

Wear the watch to bed with enough battery for the night, and turn on sleep tracking in the watch or its app. Results are estimates of sleep stages and not a medical diagnosis.

Wrist sensors are good for trends and workouts but can be less accurate during intense movement. They are not a medical device unless the maker says so. Talk to a doctor about health concerns.

Put it on its charger for at least 30 minutes with the right cable. Then hold the power button for 10 to 15 seconds. If there is no response, the battery or charger could be faulty and need service.Try: Repair cost estimator

Usually $50 to $150 at a repair shop, depending on the model. Sealed premium watches cost more to open and reseal. For a cheap fitness tracker, replacing the whole device is often more sensible.Try: Repair cost estimator

Put them in the case with the lid open, then hold the setup button on the back for about 15 seconds until the light flashes amber and then white. Forget them in Bluetooth settings first for a clean reset.

Open the AirPods case lid near your unlocked iPhone to see a battery pop-up. You can also add the Batteries widget to your Home Screen or Today View to see each earbud and the case.Try: Repair cost estimator

Interference, a weak battery, old software or being too far from the phone are the usual causes. Charge them, update your phone and reset the AirPods. Try a different spot if there is a lot of wireless noise.

The ear tip size may be wrong. AirPods Pro come with several tip sizes, so run the ear tip fit test in Bluetooth settings. Regular AirPods fit some ears better than others, and covers or hooks can help.

Not directly in most cases. Consoles generally need a headset that uses their own USB dongle or a compatible Bluetooth audio device. You can plug a wired headset into the controller instead.

Press and hold the force sensor on the stem until it switches modes, or use Control Center on your iPhone, long press the volume slider and choose Off or Noise Cancellation. Only some models have this.

Common signs are a very low price, poor packaging, odd sound, and no pop-up when you open the case near an iPhone. Check the serial number on Apple's coverage page. Buy from trusted sellers.

Clean the contacts on the earbud and the case with a dry cotton swab, then seat the earbud firmly. Try another charging cable and wall adapter. If the light never comes on, the battery may be dead.Try: Repair cost estimator

Steps depend on the brand. Many models reset by putting the earbuds in the case and holding a button for 10 to 15 seconds, or by using a touch gesture. Check the manual or app for your model.

Yes, most true wireless earbuds let you use either one alone, and put the other in the case to save charge. Some cheap models need the right earbud to start. Check your model's manual.

Most last about 4 to 8 hours of listening, with the case adding several more full charges. Noise cancellation and high volume shorten playtime. Battery life drops over the years.

Bluetooth adds some delay, which is more noticeable in video and games. Turn off extra processing, update the headphones, or use a model with low latency mode. Wired headphones have no delay.

Remove silicone tips if they detach, wash them with mild soap and water and let them dry fully before putting them back. Wipe the earbud with a dry cloth. Never submerge the earbuds.

Low battery, a weak connection, interference or an outdated controller can cause it. Charge it, move closer to the console, and update the controller software. Reset the controller if it continues.

Plug it into the console with a USB-C cable, even in rest mode if enabled, or use the charging station. The light bar pulses orange while charging and turns off when full.

Try another USB-C cable and port, and clean the controller's charging port gently. Reset the controller with a pin. If it still will not charge, the battery or port may need repair.Try: Repair cost estimator

A flashing Xbox button usually means the controller is searching for a connection. Replace the batteries, press the pairing button, and move closer to the console. Update the controller if prompted.

Check the power cable, outlet and the power brick light. Unplug the console for 10 seconds, plug it back in and try again. If the brick light is off, the power supply may have failed.

Connect the controller to the console or PC with a USB cable or wirelessly, then open Settings, Devices and accessories, pick the controller and choose Update. On PC, use the Xbox Accessories app.

Put a compatible controller such as an Xbox or PlayStation controller in pairing mode, then choose it in Settings, Bluetooth. Many games on iPhone and iPad support these controllers.

The Switch may be out of battery or frozen. Charge it for 30 minutes, then hold the Power button for 12 seconds to force a shutdown and turn it on again. If nothing happens, the screen or board may be faulty.Try: Repair cost estimator

Check that the dock's power adapter and HDMI cable are firmly connected. Try another HDMI port on the TV, then unplug the dock for a minute. Use the official adapter, since low power adapters can fail.

Low battery, interference and weak connections are common causes. Charge them by attaching to the console, move closer and update the system. Reconnect them in Controllers, Change Grip/Order.

Slide them firmly onto the console rails and check the charging light on the Switch. Clean the rail connectors gently. If they still fail to charge, a worn battery or damaged rail may need repair.

Press the square Capture button on the left Joy-Con. Hold it for about a second to record a short video clip instead. Find the files in Album on the Home menu.Try: Repair cost estimator

Go to System Settings, Data Management, and archive software or delete screenshots and videos. Archiving keeps saves but removes the game. Add a microSD card for more space.

The PS5 has no simple cache clear option, but a full power cycle helps. Turn it off fully, unplug it for a few minutes, then plug it back in. Rebuilding the database in Safe Mode can also help.

Fans spin faster when the console is hot or the vents are dusty. Give it space, keep it off carpet and away from enclosed shelves, and clean the dust catchers gently. Heavy games make it louder.

Update the system software, make sure there is free storage and check for game updates. Restart the console and rebuild the database from Safe Mode. If freezing continues, overheating or a drive fault may be the cause.

Poor airflow, dust and tight spaces are the usual causes. Keep vents clear, avoid stacking items on it and clean dust gently with compressed air. Leave a few inches around the console.

Check the HDMI cable, TV volume and audio output settings on the console. Try a different HDMI port or cable. If sound works on another TV, the problem may be the original TV or soundbar.

Make sure the TV is on the right input, then reseat the HDMI cable at both ends. Try another cable and port. If the screen is still blank, restart the console and check the video output settings.

Often yes for common issues like a bad fan, disc drive or HDMI port, since repairs usually cost less than a new console. For older models with major board damage, replacing may make more sense.Try: Repair or replace calculator

Turn the Kindle off and wipe the screen with a soft, dry microfiber cloth. If needed, slightly dampen the cloth with water. Avoid sprays and liquid cleaners, which can damage the screen.Try: Repair cost estimator

Hold the power button for about 7 seconds until the screen flashes or a power menu appears, then release it. Tap Restart if a menu shows. Newer models restart this way, and steps differ a bit by model.

Wi-Fi, a bright front light and background syncing use more power. Turn on airplane mode while reading, lower the light and close finished downloads. An old battery drains faster too.Try: Repair cost estimator

Yes. Install the free Kindle app on a phone, iPad or Android tablet and sign in with your Amazon account. Your purchased books and reading progress sync between devices.

Send the PDF to your Send to Kindle email address, use the Send to Kindle app, or connect the Kindle to a computer with a USB cable and copy the file into the Documents folder.

Check that Wi-Fi is working and airplane mode is off. Restart the Kindle, then tap Sync from the menu. Make sure you are signed in to the same Amazon account on every device.

While reading a book, tap the top of the screen and then tap Aa. Choose a font size, typeface and spacing. These settings apply to books, not to PDFs, which may need zooming instead.